Spare part Machine

MACHINE SPARE PART

Spare part machines , Mold
JIG & FIXTURE

1.Example Machining spare part  Process Flow

  1. Drilling lathe Center hole drilling Employees will bring work pieces packed on pallets. (Through the forging process) placed in an automatic conveyor system Into the centering machine to drill the work piece side-end
  • Rough turning The work piece will be loaded into the Rough Turning machine in order to turn the machine to the size according to the model produced by the program commands that are fed automatically.
  • – size checking The work piece will be conveyed into the automatic inspection machine to measure the work piece’s diameter and send the measurement results back to the turning machine for the lathe to adjust automatically.
  1. Surface hardening
  • In this step, the robot arm enters the work piece into the induction hardening machine. The machine will supply the current to the work piece to generate heat. At the same time, the Quenching solution is injected. Enter the work piece at For rapid cooling Will get the specimen of Case Depth and Surface Hardness according to the model produced With program commands that are fed automatically
  1. Annealing
  • This step is a baking work to relieve stress-internal stress. Beginning with the robot arm, the work piece from the surface hardening is put on the conveyor belt and the worker takes the item to the basket. The feed is fed into the Tempering Furnace automatically to bake the piece. Heat work
  • 4. Finishing and inspection of work pieces
  • 4.1 Straight bending, staff lift the work pieces from the basket (Basket) and put them into the conveyor system. Into the straight bending machine (Straightening) to reduce the bend – bend the work piece. And straighten by automatic machinery
  • 4.2 Finish Turning The work piece will be sent to the lathe (Finish Turning) in order to finish the turning according to the size of the model produced by the program command that automatically feeds into the machine.
  • 4.3 Angular Grinding surface
  • Round surface grinding The work piece is transported into the Angular Grinding surface. The grinding work piece position is the shear and bearing position to ensure that the work piece has a smooth surface. To be sized according to the model produced by the program commands that are automatically fed into the machine
  • 4.4 Drilling & Milling
  • Drilling and milling The work piece will be transported into the drilling and milling machine (Drilling & Milling) in order to drill the front flange of the work piece and drill the curved groove on the flange edge of the work piece to the size according to the work model Produced by program commands that are fed automatically.
  • 4.5 Inspection Process
  • 4.6 Packing and Shipping

2. Roll Mark Brand

Visual charts make data and numbers on presentations interesting and memorable Flow.